English - 5
Warning
This medical LCD monitor is intended for connection to input/output signals and other
connectors that comply with relevant IEC standard (e.g.,IEC60950 for IT
equipment and IEC60601 series for medical electrical equipment).
In addition, all such combination-system shall comply with the standard IEC
60601-1-1, safety requirements for medical electrical systems. Any person who
has formed a combination-system is responsible for the system to comply with the
requirements of IEC 60601-1-1.
If in doubt, contact qualified technician or your local representative.
On installation
1. Openings in the medical LCD monitor cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked or covered. If
you put the medical LCD monitor in a bookcase or some other enclosed
space, be sure to provide adequate ventilation.
2. Put your medical LCD monitor in a location with low humidity and a minimum
of dust.
3. Do not expose the medical LCD monitor to rain or use it near water
(in kitchens, near swimming pools, etc.). If the medical LCD monitor
accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean the medical LCD monitor with a damp cloth if necessary,
but be sure to unplug the medical LCD monitor first.
4. Place your medical LCD monitor near an easily accessible AC outlet.
5. High temperature can cause problems. Don't use your medical LCD monitor in
direct sunlight and keep it away from heaters, stoves, fireplaces,and sources
of heat.
6. Don’t place your medical LCD Monitor on an unstable stand, Medical LCD monitor
may malfunction or fall.
7. This medi
cal LCD monitor should not topple over when tilted at a 5° angle, in any
position, during NORMAL USE, excluding transport.
8. In the position specified for transport, medical LCD monitor shall not overbalance
when tilted at a 10 degree angle.
9. When you carry this product, please use both handles on left and right side of
the product which carrying more two persons.
If you want the product to be installed on another place, please call A/S center.
