8
9.
Open the door, place the gas cylinder into gas cylinder support (J), connect the regulator, screw the black
handle clockwise to tighten, turn the black handle counterclockwise to remove. Secure the gas cylinder by
tightening clockwise the retention point found on gas cylinder support (J), so that the gas cylinder cannot move
from side to side or fall down. The hose must point down. The knob on the control panel is turned all the way to
the “OFF” position when the fire pit is NOT in use (see Figure 9).
Hardware Used:
DD Bolt (M4 x 25) x 1
7. Attach door handle (K) to door panel (H) with bolt (DD), then use Phillips screwdriver (not included) to screw
tightly (see Figure 7).
Figure 8
Figure 9
Figure 7
8. Put lava rock (M) around the burner, then remove the label from the pilot box (see Figure 8). A gas fire pit
requires 13.2 lbs lava rock.
NOTE: DO NOT completely cover the burner element or block the pilot box
with the lava rocks. When the first use, preheat the lava rocks for 15 minutes to burn out the impurities
and air in the natural lava rocks.
WARNING:
keep children away during assembly, as this item contains lava rock, which are small pieces and
can be swallowed by children.
K
H
DD
M
pilot box
J
J
retention point
black handle
