FORE Sirius F80, Руководство пользователя, Страница: 2 / 4

Mounting
The Sirius F80 and F80P are designed to be mounted on top of a 80mm junction box.

Pull the cable through the mounting plate.

Mount the back plate using two screws.

Connect cable to the 7-pin screw connector.

Remove the thin orange film from the buzzer.

Attach the top of the reader to the back plate and push the bottom towards the back plate

Close the reader using the enclosed 3mm screws.
Wiring
You can use a standard CAT5 UTP or CAT6 UTP network cable with RJ45 T-568B
connectors to connect the card reader to the Polyx NF+.

Plug the RJ45 connector of one end of the cable in port Reader 1 or Reader 2 of the Polyx
NF+.

Cut off the RJ45 from the other end of the network cable.

Remove the isolation and untwist the wires.

Combine the orange and green wires and connect them to pin 1 (A).

Combine the white/orange and white/green wires and connect them to pin 2 (B).

Connect the brown wire to pin 6 (GND).

Connect the blue wire to pin 7 (VCC+).
The white/brown and white/blue wire are not used.
Sirius F80 RJ45 T568B color RJ45 T568B pin
7 VCC (+) Blue 4
6 GND (-) Brown 8
5