PC Adapter Quickstart Guide
Page 9
In
stal
la
tio
n
o
n
W
in
d
o
w
s
9
5
Installation on Windows 95
Use the following procedure to install the adapter drivers for Windows 95 (if you need
to create installation diskettes, rather than installing from the ForeRunner software CD,
refer to page 18 of this quickstart guide):
1. Install the ForeRunner ATM adapter driver via auto-discovery when you boot up
your machine after installing the adapter.
a. When prompted with the New Hardware Found dialog box, insert the
ForeRunner software CD in the CD-ROM drive and click OK.
b. Change the path to specify
d:\windows\win95
, where
d:
indicates your
CD-ROM drive and click the OK button. A warning appears, reminding you to
install the ELAN or IP Over ATM adapter driver.
c. Click OK to proceed. The driver files are copied from the CD.
2. If your site is using LAN Emulation - In the Network Control Panel, select Add. Pro-
ceed to install a FORE Systems ForeRunner ELAN adapter for each ELAN to which
you want to connect. This adapter will appear under FORE Systems in the Select
Network adapters dialog box.
3. If your site is using Classical IP (RFC 1577) - In the Network Control Panel, select
Add. Proceed to install a FORE Systems IP Over ATM driver for each Classical IP
(RFC 1577) LIS to which you want to connect. For each IP Over ATM driver, you
must specify the ATM address of the ARP server.
4. Bind protocols and assign IP addresses to the ELAN and IP Over ATM drivers as
necessary for your site.
5. Reboot as prompted to load the drivers.
The installation is complete. For complete installation procedures, refer to the manual
included in the
\windows\docs
directory of the ForeRunner software CD.