2. When a message to begin pairing
appears in the audio display, search for
SYNC on your cell phone to start the
pairing process.
3. When prompted on your cell phone's
display, enter the six-digit PIN provided
by the system in the audio display. The
display indicates when the pairing is
successful.
Pairing Subsequent Cell Phones
Note:
You must switch the ignition and radio
on.
1.
Press the
PHONE
button.
2. Select the option for Bluetooth devices.
3. Press the
OK
button.
4. Select the option to add. This starts the
pairing process.
5. When a message to begin pairing
appears in the audio display, search for
SYNC on your device to start the pairing
process.
6. When prompted on your cell phone's
display, enter the six-digit PIN provided
by the system in the audio display. The
display indicates when the pairing is
successful.
Making Calls
Press the voice button and when prompted
ask the system to call a name or dial a
number. When the system confirms the
number, ask it to dial again to initiate the
call.
To erase the last spoken digit, ask the
system to delete or press the left arrow
button on the audio unit. To erase all
spoken digits, ask the system to clear or
press and hold the left arrow button on the
audio unit.
To end the call, press the end call button
on the steering wheel or select the end call
option in the audio display and press
OK
.
Receiving Calls
When receiving a call, you can:
•
Answer the call by pressing the accept
call button on the steering wheel or by
selecting the accept call option in the
audio display. Press the
OK
button.
•
Reject the call by pressing the reject call
button on the steering wheel or by
selecting the reject call option in the
audio display. Press the
OK
button.
USING SYNC™ WITH YOUR
MEDIA PLAYER
SYNC is capable of hosting nearly any
digital media player including: iPod®,
Zune™, Plays from device players, and
most USB drives.
Connecting Your Digital Media
Player to the USB Port
To Connect Using Voice Commands
1.
Plug the device into your vehicle's USB
port.
2. Press the voice button and when
prompted, say "USB".
To Connect Using the System Menu
1.
Plug the device into your vehicle's USB
port.
2. Press the
AUX
button until
initializing
appears in the top left corner of the
display.
NAVIGATION
Using Navigation
WARNING
For all warnings, refer to your Owner's
Manual.
Note:
Do not turn the ignition key or attempt
to start the engine while the software is
updating.
12
Tourneo Custom/Transit Custom (TTF) , CG3580en enGBR, Edition date: 02/2014, None