Contact the manufacturer of your child
restraint for information about ordering a
tether strap, or to obtain a longer tether
strap if the tether strap on your safety seat
does not reach the appropriate top tether
anchor in your vehicle.
Once you install the child safety seat using
either the seatbelt, the lower anchors of
the LATCH system, or both, you can attach
the top tether strap.
The tether strap anchors in your vehicle
are in the following positions (shown from
top view):
E142537
Perform the following steps to install a
child safety seat with tether anchors:
Note:
If you install a child restraint with rigid
LATCH attachments, do not tighten the
tether strap enough to lift the child restraint
off your vehicle seat cushion when the child
is seated in it. Keep the tether strap just snug
without lifting the front of the child restraint.
Keeping the child restraint just touching your
vehicle seat gives the best protection in a
severe crash.
1.
Route the child safety seat tether strap
over the seatback.
E173198
2. Locate the correct anchor for the
selected seating position.
E173199
3. Open the tether anchor cover.
E173200
4. Clip the tether strap to the anchor as
shown.
24
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Child Safety
Содержание Taurus2017
Страница 3: ......
Страница 9: ...6 Taurus CPH Canada United States of America enUSA First Printing ...
Страница 493: ...490 Taurus CPH Canada United States of America enUSA First Printing ...