Ford SRS Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 35

Ford SRS Скачать руководство пользователя страница 24

Removal (With Seat Integrated Restraints)

Before proceeding, see

AIR BAG SAFETY PRECAUTIONS

. Disable air bag system. See

DISABLING

SYSTEM

under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove appropriate front seat. See

FRONT SEAT

. Remove nut and buckle-pretensioner assembly.

Installation

To install, reverse removal procedure. Tighten seat belt buckle-pretensioner nut to specification. See

TORQUE

SPECIFICATIONS

. Activate air bag system. See

ACTIVATING SYSTEM

under DISABLING &

ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light for proper system function. See

SYSTEM

OPERATION CHECK

.

Removal (Without Seat Integrated Restraints)

1. Before proceeding, see

AIR BAG SAFETY PRECAUTIONS

. Disable air bag system. See

DISABLING SYSTEM

under DISABLING & ACTIVATING AIR BAG SYSTEM.

2. On regular cab models, use Seat Bolt Bit (501-010) to remove seat belt lower anchor bolt. Remove seat

belt retractor-pretensioner upper mounting bolt. Using seat bolt bit, remove seat belt retractor-
pretensioner mounting bolt and retractor-pretensioner assembly.

3. On Crew Cab models, use seat bolt bit to remove seat belt lower anchor bolt. Using seat bolt bit, remove

seat belt retractor-pretensioner mounting bolt. Lift seat belt retractor-pretensioner at bottom and pull out,
disengaging upper bracket. Remove retractor-pretensioner assembly.

Installation

1. Install seat belt retractor-pretensioner and mounting bolt. Tighten retractor-pretensioner mounting bolt to

specification. See

TORQUE SPECIFICATIONS

. Remove pretensioner simulator from pretensioner

harness connector and reconnect connectors. Connect negative battery cable. With air bag simulators
installed at all remaining deployable devices, perform system operation check. See

SYSTEM

OPERATION CHECK

.

2. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored

energy. To complete installation, reverse removal procedure. Tighten fasteners to specification. Activate
air bag system. See

ACTIVATING SYSTEM

under DISABLING & ACTIVATING AIR BAG

SYSTEM. Check AIR BAG warning light for proper system function.

STEERING WHEEL

Removal & Installation

NOTE:

When tightening seat belt buckle-pretensioner nut, ensure seat backrest pivot
bolt does not turn with nut.

CAUTION: Removing steering without proper puller may damage steering column

bearings.

2001 Ford Pickup F350 Super Duty

2001 ACCESSORIES/SAFETY EQUIPMENT Ford Motor Co. - Air Bag Restraint Systems

Helpmelearn

November-29-07 7:13:42 PM

Page 24

© 2005 Mitchell Repair Information Company, LLC.

«
...
22
23
24
25
26
...
»

Содержание SRS




































Отзывы:

Нет отзывов