1.
Assemble the jack handle.
Note:
Assemble the three handles to jack
the rear of the vehicle.
2. Ensure screwthread on the jack is
adequately lubricated before use.
3. Loosen the wheel nuts.
4. Raise your vehicle until the tire is clear
of the ground.
E134693
5. Remove the wheel nuts and the road
wheel.
Installing a Road Wheel
WARNING:
Use only approved
wheel and tire sizes. Using other sizes
could damage your vehicle.
WARNING:
Do not fit run flat tires
on vehicles that were not originally fitted
with them. See an authorized dealer for
more details about compatibility.
WARNING:
Make sure there is no
grease or oil on the threads or the
surface between the wheel lugs and
nuts. This can cause the lug nuts to
loosen while driving.
WARNING:
Have the lug nuts
checked for tightness and the tire
pressure checked as soon as possible.
WARNING:
Do not install alloy
wheels using lug nuts designed for use
with steel wheels.
Note:
The wheel nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a maximum of two
weeks.
Note:
Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note:
Make sure that the cones on the
wheel nuts are against the wheel.
1.
Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.
E79156
4. Partially tighten the wheel nuts in the
sequence shown.
5. Lower the vehicle and remove the jack.
6. Fully tighten the wheel nuts in the
sequence shown. See
7.
Make sure that the projection of the
cap is positioned on the same position
as the projection of the hub.
298
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, First-Printing
Wheels and Tires
Содержание RANGER 2019
Страница 3: ......
Страница 9: ...6 Ranger TFG Canada United States of America enUSA Edition date 201809 First Printing ...