Ford Pro NL38-10C823-AA, Руководство по установке, Страница: 8 / 69

P a g e | 8
Mount Bracket
MOUNT BRACKET TO WALL
A Locate Stud with Stud Finder
B Verify Gang Box is installed on right side of stud.
Top Bracket hole should be between 35-
60” from floor
.
See page 2 dimensional graphic.
No Gang Box needed if AC Conduit Installation
C Line up Mounting Bracket opening with Gang Box as
shown, use Level to align Bracket and mark the two
center mounting holes.
D Use Drill w
ith 7/32” bit to drill pilot into stud.
E
Align Bracket on wall and Install (2) 3/8” x 2
-
1/2” Hex
Lag Bolts into wall using 9/16” Socket to tighten to wall.
(See Figure below).
QTY KIT ITEM
1 MOUNTING BRACKET
2
3/8” X 2
-
1/2” HEX LAG BOLT
TOOLS NEEDED
STUD FINDER
LEVEL
Drill with 7/32” Pilot Bit
9/16”
SOCKET
Install Lag Bolts using
9/16” Hex Head
7/32” Pilot holes
in the stud wall
Gang Box right side stud
mount (Standard Method)
Align Gangbox with opening
in Mounting Bracket