10
Entering the Vehicle While it is Running via Remote Start:
1.
Enter the vehicle with the Integrated Keyhead transmitter.
2.
Insert the key into the ignition and turn to the ON position.
3.
Once a programmed vehicle key has been recognized, the remote start session
will stop and the vehicle will operate normally.
Pre-Heating or Pre-Cooling the Interior of the Vehicle:
Most vehicles will automatically heat/cool the vehicle without presetting the HVAC
controls (See the vehicle owner’s manual for further details).
Remote Start Safety Features
Remote Start Prevention and Shut down:
For safety and security reasons, the system will prevent remote start activation or shut
down the engine during remote start operation if any of the following occur:
• The hood is opened
• Gear selector is moved***
• Vehicle Security System is triggered
As a safety precaution, the vehicle will shut off if left unattended for 15 minutes.
Default remote start runtime can be changed: Refer to Message Center in the
Instrument Cluster chapter of your vehicle’s owner manual for further details.
Power Window / Moonroof Disable (if factory equipped):
On certain model vehicles, each time the remote start feature is activated, all power
windows and the moonroof will be disabled while the vehicle is running via remote
start. The windows and moonroof will resume normal operation after the remote start
is shut down, or the vehicle is being used with the vehicle key.
Automatic Door Locking:
Each time the remote start feature is activated, the power door locks will be activated
prior to the vehicle starting. The doors can be unlocked at any time via the vehicle key
fob.
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more than
2.5 seconds.
*** On some vehicles.
Remote Start Operation (optional)
4280760 Phase 2 VSS_RMST Owners Guide_P6.indd 10
4280760 Phase 2 VSS_RMST Owners Guide_P6.indd 10
4/27/2017 9:41:36 AM
4/27/2017 9:41:36 AM
