15. Disconnect the differential pressure feedback EGR.
16. Remove the nut and disconnect the brake booster vacuum line and bracket.
17. Disconnect the fuel lines. For additional information, refer to
Section 310-01
.
18. Disconnect the idle air control motor electrical connector.
19. Position the EGR valve to exhaust manifold tube aside.
Disconnect the upper fitting.
Loosen the lower fitting.
Disconnect the two vacuum lines.
Position the tube aside.
20. Remove the four bolts and remove the throttle body adapter.
Page 3 of 12
2000 Expedition/Navigator Workshop Manual
1/29/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYJ/~MUS~LEN/20/S...
