Operating at High Speeds and
Track Days
Your vehicle is capable of sustained high
speeds and track day driving.
Before operating your vehicle at high
speeds:
•
Verify your tires have the correct
pressures.
•
Inspect wheels and tires for wear and
damage. Replace any damaged wheels
and tires.
•
Check and set lug nut torque. See
•
Verify fluid levels for oil, coolant, brake
and hydraulic fluid. See
•
Change the engine oil and replace the
engine oil filter prior to use on the track.
Change the engine oil and filter again
after every four hours of track time.
Maintain the engine oil level at or near
the max mark on the engine oil dipstick.
See
•
Replace the brake fluid with fresh
Motorcraft/Ford DOT 4 LV High
Performance Brake Fluid or other DOT
compliant fluid with a dry boiling point
greater than 500°F (260°C) from a
sealed container. Do not use silicone
or DOT 5 brake fluids.
•
If you are operating your Mach 1 on a
drag strip, use drag strip selectable
drive mode in addition to using line lock
and launch control to provide a specific
set-up tuned for the quickest straight
line elapsed times.
•
If you are operating your Mach 1 on a
road course, use sport or track
selectable drive modes to provide a
specific set-up tuned for optimal shift
and suspension set-up that is tuned
towards handling prowess on closed
course surfaces.
After operating your vehicle at high speeds
or track day driving, do the following:
•
Set the tire pressure to the proper
specification.
•
Check and set the lug nut torque. See
•
Check all fluid levels.
•
Refer to the track maintenance interval
chart. See
•
Check the front and rear wheel
bearings for abnormal wear.
•
Inspect brake caliper dust boots for
abnormal wear.
Track Apps
WARNING:
Track Apps™
is for
track use only. Remember that even
advanced technology cannot defy the
laws of physics. It is always possible to
lose control of a vehicle due to
inappropriate driver input for the
conditions. Aggressive driving on any
road condition can cause you to lose
control of your vehicle increasing the risk
of personal injury or property damage.
This information display driven feature
provides a suite of menu options to record
and optimize your track performances.
See
Note:
Track Apps are for track use only. Do
not use them under any other driving
conditions.
Note:
You cannot view or clear your results
unless your vehicle is at a complete stop
with the right arrow on the display menu
inactive. If your vehicle does not reach
100 mph (160 km/h) during the track run,
your display may not show your selected
interval's results.
43
Mustang (CZG) Mach 1, enUSA, First-Printing
Track Use
Содержание MUSTANG MACH 1 2021
Страница 3: ......
Страница 81: ...78 Mustang CZG Mach 1 enUSA First Printing ...