HAMMER DRILL 750 W
1 APLICATION
The power tool is intended for driving and drilling through wood, metal, plastics
and masonry. It is not designed for commercial use.
WARNING Please read and understand this operating manual
before use and keep it for your future reference.
2 DESCRIPTION (FIG. A)
1. Depth stop
2. SDS Chuck
3. Auxiliary handle
4. Mode selector
5. Lock knob for depth stop
6. Soft grip
7. Forward/reverse lever
8. On/off trigger
9. Lock on button
10. Dust cover
3 PACKAGE CONTENT LIST
• Remove remaining packaging and transit supports (if existing)
• Check the completeness of the packing content
• Check the appliance, the power cord, the power plug and all accessories for
transportation damages.
• Keep the packaging materials as long as possible till the end of the warranty
period.Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not
play with plastic bags! Danger of suffocation!
1 hammer drill
1 manual
3 SDS drill (8/10/12 x 150mm)
2 chisel (14 x 250mm, 1 point, 1 flat)
1 13mm chuck and adapter
1 dust cover
1 depth gauge
1 grease cup
When parts are missing or damaged, please contact your dealer.
4 EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following symbols are used:
In accordance with essential
applicable safety standards
of European directives
R
ead instructions carefully
Class II machine –Double
insulation –You don’t need
any earthed plug.
Wear safety glasses and ear
protection
Denotes risk of personal injury, loss of life or damage to the tool in
case of non- observance of the instructions in this manual
FX1-1052
EN
Copyright © 2015
P a g e
|
2
www.Ford-tools.com
FX1-1052
• Remove all packing materials