Ford Focus 3 c346 2013, Руководство пользователя

Страница: 148 / 188

-148-
Audio unit operation
STATION PRESET BUTTONS
This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the
preset buttons.
1.
Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. A progress bar and
message will appear. When the
progress bar completes the station
has been stored. The audio unit
will also mute momentarily as
confirmation.
This can be repeated on each waveband
and for each preset button.
Note: When you drive to another part of
the country, FM stations that broadcast
on alternative frequencies, and are
stored on preset buttons, may be
updated with the correct frequency and
station name for that area.
AUTOSTORE CONTROL
Note: This will store up to a maximum of
the 10 strongest signals available, either
from the AM or the FM waveband, and
overwrite the previously stored stations.
It can also be used to store stations
manually in the same way as other
wavebands.
Note: You must select either FM AST or
AM AST to use this function.
• Press and hold function button 1 or
the RADIO button.
• When the search is complete,
sound is restored and the strongest
signals are stored on the Autostore
presets.
TRAFFIC INFORMATION
CONTROL
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic programme information.
Activating traffic
announcements
Before you can receive traffic
announcements, you must press
either the TA or TRAFFIC button. A ‘TA’
display will appear to show the feature is
switched on.
If you are already tuned to a station that
broadcasts traffic information, ‘TP’ will
also be displayed. Otherwise the unit will
search for a traffic programme.
When traffic information is broadcast, it
will automatically interrupt normal radio or
CD playback and ‘Traffic announcement
(TA)’ will appear in the display.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless TA
or TRAFFIC is turned off, then on again.
Note: If TA is on and you select a preset
or manual tune to a non TA station no
traffic announcement will be heard.
Note: When you are listening to a non
TA station and turn TA off and on again a
TP seek will occur.
Traffic announcement volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level
that is usually louder than normal
listening volumes.
To adjust the preset volume:
• Use the volume control to make the