GO to
H8
.
No
Repair circuit 15S-HB35 (VT/BK) or 15S-HB36 (VT/OG). TEST the system for normal operation.
H8
CHECK THE INOPERATIVE EXTERIOR MIRROR GROUND CIRCUIT
Measure the resistance between:
NOTE:
Driver Door Mirror
the door mirror connector C807 pin 5, circuit 31-HB35 (BK), harness side and ground;
NOTE:
Passenger Door Mirror
the door mirror connector C808 pin 5, circuit 31-HB36 (BK), harness side and ground.
Is the resistance less than 5 ohms?
Yes
INSTALL new heated mirror glass(es). TEST the system for normal operation.
No
REPAIR circuit 31-HB35 (BK) or 31-HB36 (BK). TEST the system for normal operation.
H9
CHECK FOR VOLTAGE AT THE HEATED REAR WINDOW
Inoperative Heated Rear Window C949 or C950
Operate the heated rear window switch.
Measure the voltage between:
NOTE:
3-door and Wagon
the heated rear window connector C949, circuit 15S-HB19 (GN/BU), harness side and ground.
NOTE:
4-door
the heated rear window connector C950, circuit 15S-HB19 (GN/BU), harness side and ground.
Is the voltage greater than 10 volts?
Yes
4-door and wagon GO to
H10
. ; 3-door INSTALL a new heated rear window.
No
REPAIR circuit 15S-HB19 (GN/BU). TEST the system for normal operation.
H10
CHECK THE HEATED REAR WINDOW GROUND CIRCUIT
Inoperative Heated Rear Window C948 or C950
Measure the resistance between:
NOTE:
Wagon
the heated rear window connector C948, circuit 31-HB19 (BK), harness side and ground.
NOTE:
4-door
the heated rear window connector C950, circuit 31-HB19 (BK), harness side and ground.
Page 16 of 17
2001 Focus Workshop Manual
8/21/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS1Y/~MUS~LEN/20/S...
