Glass, Frames and Mechanisms
Refer to Wiring Diagrams Cell: 50111, for schematic and connector information.
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical or electrical damage.
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart
Symptom Chart
SECTION 501-11: Glass, Frames and Mechanisms
2001 Focus Workshop Manual
DIAGNOSIS AND TESTING
Procedure revision date: 12/14/2000
Visual Inspection Chart
Mechanical
Electrical
Window seal
Door window frame
Fuse(s)
Electrical connector(s)
Switch(es)
Grid wire(s)
Circuit(s)
Initialization process
Relay(s)
Condition
Possible Sources
Action
All power windows are inoperative — front and rear
power windows
Circuit(s).
Go To Pinpoint Test A
.
A single power window is inoperative — front and rear
power windows — driver power window
Driver power window
control switch.
CARRY OUT the Driver Power Window Control Switch
Component Test. REFER to the Wiring Diagrams.
Circuit(s).
Go To Pinpoint Test B
.
A single power window is inoperative — front and rear
power windows — passenger power window
Driver power window
control switch.
CARRY OUT the Driver Power Window Control Switch
Component Test. REFER to the Wiring Diagrams.
Passenger power window
control switch.
CARRY OUT the Passenger Power Window Control Switch
Component Test. REFER to the Wiring Diagrams.
Circuit(s).
Go To Pinpoint Test C
.
The one-touch up/down feature is inoperative — front
and rear power windows
Driver power window
control switch.
CARRY OUT the Driver Power Window Control Switch
Component Test. REFER to the Wiring Diagrams.
Circuit(s).
Go To Pinpoint Test D
.
All power windows are inoperative — front power
windows
Circuit(s).
Go To Pinpoint Test E
.
A single power window is inoperative — front power
windows — driver side
Driver power window
control switch.
CARRY OUT the Driver Power Window Control Switch
Component Test. REFER to the Wiring Diagrams.
Driver power window
regulator motor.
Go To Pinpoint Test F
.
A single power window is inoperative — front power
windows — passenger side
Passenger power window
control switch.
CARRY OUT the Passenger Power Window Control Switch
component Test. REFER to the Wiring Diagrams.
Driver power window
control switch.
CARRY OUT the Driver Power Window Control Switch
Component Test. REFER to Wiring Diagrams.
Passenger power window
regulator motor.
Circuit(s).
Go To Pinpoint Test G
.
The one-touch down feature is inoperative — front
power windows
Driver power window
control switch.
CARRY OUT the Driver Power Window Control Switch
Component Test. REFER to Wiring Diagrams.
The defrost system is inoperative
Central timer module.
CARRY OUT the Central Timer Module Self-Test. REFER to
Section
419-10
.
Heated windshield relay.
CARRY OUT the Heated Windshield Relay Component Test.
REFER to the Wiring Diagrams.
Heated windshield control
switch.
CARRY OUT the Heated Windshield Control Switch
Component Test. REFER to the Wiring Diagrams.
Heated rear window relay.
CARRY OUT the Heated Rear Window Relay Component
Test. REFER to the Wiring Diagrams.
Heated rear window
control switch.
CARRY OUT the Heated Rear Window Control Switch
Component Test. REFER to the Wiring Diagrams.
Heated rear window grid
wire.
Circuit(s).
Go To Pinpoint Test H
.
The defrost system will not shut off automatically
Central timer module.
CARRY OUT the Central Timer Module Self Test. REFER to
Section
419-10
.
Heated windshield relay.
CARRY OUT the Heated Windshield Relay Components
Test. REFER to the Wiring Diagrams.
Heated rear window relay.
CARRY OUT the Heated Rear Window Relay Component
Test. REFER to the Wiring Diagrams.
Page 1 of 17
2001 Focus Workshop Manual
8/21/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS1Y/~MUS~LEN/20/S...
