E161714
B
A
The system only works with the lighting
control in the autolamp position.
Note:
There is a delay of two to five
seconds before the system operates when
you drive your vehicle.
Note:
The system is only active at speeds
above 3 mph (5 km/h).
The system has a power-up movement
check feature. When your start your
vehicle, the lamps track left to right, then
back to center to alert the driver that the
system is working properly.
DIRECTION INDICATORS
E163272
•
To operate the left-hand direction
indicator, push the lever down until it
stops.
•
To operate the right-hand direction
indicator, push the lever up until it
stops.
•
To manually cancel direction indicator
operation, push the lever again in either
direction.
Lane Change
To indicate a left or right lane change:
•
Push the lever up or down to the first
stop position and release. The direction
indicator will flash three times and
stop.
•
Push the lever up or down to the first
stop position and hold. The direction
indicator will flash for as long as you
hold the lever in this position.
INTERIOR LAMPS
The lamps will switch on when you have
met one of the following conditions:
•
You open any door.
•
You press a remote control button.
•
You press the outer edge of the clear
lens on the front row map lamp.
84
Flex (), enUSA, First Printing
Lighting
Содержание Flex 2016
Страница 3: ......
Страница 9: ...6 Flex enUSA First Printing...
Страница 407: ...404 Flex enUSA First Printing...