Ford FE1-25, Инструкция по эксплуатации, Страница: 8 / 11

FE1-25
EN
Copyright © 2015
P a g e | 7
www.Ford-tools.com
9 OPERATING INSTRUCTIONS
ƒ
Connect polisher to the mains.
ƒ
Hold safety switch (3) down whilst simultaneously pressing on/off button (3).
ƒ
Set polisher to desired speed using speed selector (4).
ƒ
Apply polishing cap to surface to be polished, and move polisher gently in a
figure-of-eight pattern.
ƒ
Avoid pressing polisher hard against surface to be polished, but press a little
harder when polishing corners or angles.
ƒ
Buff thoroughly to achieve the best possible final result. Lift polishing cap
from surface, and stop by
ƒ
releasing on/off button.
10 TECHNICAL DATA
Model number FE1-25
Nominal voltage 230-240V ~50Hz
Power consumption 1050W
No load speed 1000-3000min
-1
Polishing disk Ø150 mm
11 NOISE
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level L
pA
84 dB(A)
Acoustic power level L
wA
95 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
a
w
(Vibration) 6.51 m/s² K = 1.5 m/s²