Ford FE1-19 Скачать руководство пользователя страница 9

Страница: 9 / 13

FE1-19

P a g e

www.Ford-tools.com

8.5

Hammer / drill switch

The hammer/drill switch can switch the drill, hammer and hammer/ drill

functions.

There is a lock knob in front hammer/ drill switch, please depressed it first to

preventing any unintentional adjusting.

To set the function, please use below compounding of front and rear

hammer/drill switch.

Important! When hammer drilling you will require a low

pressure. Too much pressure will place unnecessary load on the

motor. Check the drill bits regularly. Re-sharpen or replace

blunt drill bits.

Hammer/ drill mode:

Drill in masonry, concrete and natural

stone.

Don’t use the hammer drill function for

ceramic tile or others material can not

withstand impact energy.

Chiseling mode:

Drill in masonry, concrete and natural

stone.

Drilling mode:

Drilling in wood, synthetic materials and

metal.

WARNING! No function

mode:

The motor turns without load, the shaft

will not turn. Do not set the switch like

this. It may damage the motor greatly.

Содержание FE1-19














Результаты поиска

Содержание FE1-19

Отзывы:

Ford FE1-19, Инструкция по эксплуатации, Страница: 9 / 13

Результаты поиска

Содержание FE1-19

Отзывы: