F181-30
EN
Copyright © 2015
P a g e
|
6
www.Ford-tools.com
preventive safety measures reduce the risk of starting the power tool
accidentally.
x
Store power tools, when not in use, out of the reach of children and
do not allow people who are not familiar with the power tool or these
instructions to operate it.
Power tools are potentially dangerous in the
hands of untrained users.
x
Maintenance. Check for misalignment or jammed moving parts,
breakages or any other feature that might affect the operation of the
power tool
.
If it is damaged, the power tool must be repaired. Many
accidents are caused by using poorly maintained power tools.
x
Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to jam and are easier to control
.
x
Use the power tool, accessories and cutting tools, etc., in accordance
with these instructions and in the manner intended for the particular
type of power tool, taking into account the working conditions and
the work which needs to be done
.
Using a power tool in ways for which it
was not intended can lead to potentially hazardous situations.
5.5
Battery tool use and care
x
Recharge only with the charger specified by the manufacturer.
A
charger that is suitable for one type of battery pack may create a risk of fire
when used with another battery pack.
x
Use power tools only with specifically designated battery packs.
Use
of any other battery packs may create a risk of injury and fire.
x
When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another
.
Shorting the battery terminals together may cause burns or a fire
.
x
Under abusive conditions, liquid may be ejected from the battery; avoid
contact.
x
If contact accidentally occurs, flush with water
.
If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
5.6
Service
x
Your power tool should be serviced by a qualified specialist using
only standard spare parts
.
This will ensure that it meets the required
safety standards.
6
SPECIAL SAFETY INSTRUCTIONS FOR JIG SAWS
Important! Use of any accessories or attachments other than
those supplied or recommended in these operating instructions
can mean the risk of injury.
When using jig saws ear protectors and a face mask should be worn. Exposure
to noise can cause damage to hearing.
Do not use the jig saw to cut asbestos or materials containing asbestos.
Do not leave power tools running unattended. Always switch off and do not put
down or leave until it has stopped completely.
Long hair must be covered. Do not work in loose fitting clothing.
