REMOVING A REAR LAMP
ASSEMBLY - VEHICLES WITHOUT:
PICKUP BED
E163828
1.
Switch all of the lamps and the ignition
off.
2. Remove the screws and the lamp lens
from lamp assembly.
3. To install, reverse the removal
procedure.
REMOVING A REAR LAMP
ASSEMBLY - VEHICLES WITH:
PICKUP BED
1.
Make sure the headlamps are off.
2. Open the tailgate to access the rear
lamp assemblies.
E187288
3. Remove the bolts from the tail lamp
assembly.
4. Carefully pull the lamp assembly from
the tailgate pillar by releasing the two
retaining tabs.
5. To install, reverse the removal
procedure.
CHANGING A HEADLAMP BULB
WARNING:
Make sure the bulbs
have cooled down before removing
them. Failure to follow this warning could
result in serious personal injury.
Note:
To access the right-hand side bulbs,
remove the air intake pipe. See
For vehicles with diesel engines, to access
the left-hand side bulbs, remove the washer
reservoir filler tube.
E224991
1.
Switch all of the lamps and the ignition
off.
2. Disconnect the electrical connector.
3. Turn the bulb holder counterclockwise
and remove it.
Note:
You cannot separate the bulb from
the bulb holder.
414
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing
Maintenance