INSTRUMENT PANEL
2
SPOT LAMPS CONTROL*
The spot lamps are on the
forward-facing side of the exterior
mirrors. With the lighting control
switch in the parking lamps
position, press the buttons located
above the lighting control switch to
activate the left-hand or right-hand
side spot lamps. Once switched
on, the spot lamps light the area
in front of and to the side of your
vehicle. Adjust the aim of the spot
lamps by moving the exterior
mirrors' positions.
Note:
The spot lamps turn off
when you reach a speed of 6 mph
(10 km/h).
3
LIGHTING CONTROL
Headlamps off.
Parking lamps on.
Headlamps on.
Autolamps on.
Automatically switches
the exterior lamps on or off
based on available daylight.
Fog lamps on. Press the
control to switch the fog
lamps on or off. You can
switch the fog lamps on
when the lighting control is
in any position except off
and the high beams are
not on.
4
ELECTRIC PARKING BRAKE*
On certain models, the electric
parking brake replaces the
conventional foot brake. The
operating switch is on the
instrument panel, to the left of
the steering column.
To apply the electric parking brake,
make sure the transmission is
locked into park (P), and then pull
the
switch up. The brake system
warning lamp fl ashes then lights to
confi rm that you applied the brake.
To release the electric parking
brake, switch the ignition on, press
the brake pedal, and then manually
press the
switch down. The
brake system warning lamp then
turns off to confi rm the parking
brake is released.
5
ADJUSTING THE PEDALS*
Depending on your vehicle, you can
use either the vertical or horizontal
control to move the brake and
accelerator pedals. The vertical
control is to the left of the steering
column and on the instrument
panel. The horizontal control is on
the left side of the steering column.
Press the left arrow to move the
pedals away from you.
Press the right arrow to move the
pedals closer to you.
Adjust the pedals only after
stopping your vehicle and placing
it in park (P).
6
INFORMATION
DISPLAY CONTROLS*
Monitor and control important
vehicle information and features
through the information display.
•
Press the up or down arrows
to scroll through and highlight
the options within a menu.
•
Press the right arrow to enter
into a sub-menu.
•
Press the left arrow to exit
a menu.
•
Press
OK
to choose and confi rm
a setting or message.
You can even customize your views
using MyView*.
Refer to the
Information Displays
chapter in your
Owner’s Manual
for
more details.
7
ADAPTIVE CRUISE CONTROL*
Adaptive Cruise Control adjusts
your speed to maintain a set
distance between your vehicle and
the vehicle in front of you in the
same lane. You can select from
one of four gap settings by pressing
the gap controls on the steering
wheel. The system can also bring
your vehicle to a complete stop
and may resume going forward in
stop-and-go traffi c.
Refer to the
Cruise Control
chapter in your
Owner’s Manual
for safety information, more
details and limitations.
8
POWER ADJUSTABLE
STEERING COLUMN*
Use the control on the side of
the steering column to adjust
the position.
To tilt:
Press the top or bottom of
the control.
To telescope:
Press the front or
rear of the control.
1
POWERSCOPE
TM
POWER TELESCOPING,
POWER-FOLDING, POWER
EXTERIOR MIRRORS*
To telescope both mirrors at the
same time, make sure you switch
your vehicle on (with the ignition
in accessory mode or the engine
running) and then:
1. Press and release the power
fold button
.
2. Press the adjustment control to
position the mirrors.
•
Press the left arrow to
extend the mirrors out. Press
the right arrow to retract the
mirrors in.
•
Press the up or down arrow
to fold the mirrors toward
the window glass. Press the
up or down arrow to fold
the mirrors out.
Note:
Moving the mirrors 10 or
more times within one minute, or
repeated folding and unfolding
of the mirrors while holding the
control down during full travel,
may disable the system to protect
the motors from overheating. Wait
approximately three minutes with
the vehicle running, and up to
10 minutes with the vehicle off,
for the system to reset and for
function to return to normal.
1
3
5
6
2
8
7
4
-
5
4
-
5
*if equipped
4
