A
B
E
D
C
G
H
J
K
I
(if equipped)
(if equipped)
Scan Function
– In radio mode, press
to hear a sampling of all listenable
stations. In CD mode, press to hear a
brief sampling of all selections on the
current CD.
CD/AUX
– Press to select CD/AUX modes.
No CD will display if a CD is not in the
audio system. If a disc is loaded, there
will be a number (1-6) inside the circle
on the display. When in radio mode,
press CD/AUX to play a loaded CD.
Loading CD
– Press LOAD and then a
preset number to select a slot. Press and
hold LOAD to activate autoload.
Volume/Power Control
– Press the
control to turn the audio system on or
off. Turn the control to raise or lower
volume.
AM/FM Select
– Press to select AM/FM
frequency band. Autostore allows you to
set the strongest local radio stations
without losing your original manually
preset stations for AM, FM1, or FM2.
Press and momentarily hold AM/FM.
AUTOSTORE will flash on the display.
When the six strongest stations are filled,
the station stored in preset 1 will begin
playing. If there are less than six strong
stations, the system will store the last
one in the remaining presets. Press again
to disengage.
Satellite
– Your Audiophile radio comes
equipped with satellite-ready capability.
The kit to enable satellite reception is
available through your Ford dealer.
Detailed satellite instructions are
included with the dealer-installed kit.
Dealer-installed satellite kits are only
available in the continental United States.
Disc/Tune CAT
– In radio mode, press to
move to the next frequency up or down
the band. In CD mode, press to select a
disc in the CD player. CAT is only available
when equipped with satellite radio. The
kit to enable satellite reception is available
through your Ford dealer. Detailed
satellite instructions are included with the
dealer-installed kit.
Digital Signal Processing
– Press DSP
and then SEL to choose the desired
signal mode.
Seek Function
– In radio mode, press to
move to the next listenable station up or
down the band. In CD mode, press to
select the next/previous track on the
current disc.
Setting the Clock
– Press MENU until
SELECT HOUR or SELECT MINUTE is
displayed. Press SEL to set the time. Press
MENU again to disengage the clock mode.
Setting Memory Preset Stations
– Select
AM, FM1, or FM2 band, then select a
station. Next, press and hold a numbered
control until the sound returns.
A
B
D
E
C
F
G
J
K
I
H
CAUTION: DO NOT USE CD WITH ADHESIVE LABEL*
*CDs with adhesive labels and irregularly shaped CDs may get stuck in the CD player. Homemade
CDs should be identified with permanent felt tip marker rather than adhesive labels.
F
