2. Remove the old battery.
Note:
Please refer to local
regulations when disposing of
transmitter batteries.
3. Insert the new battery. Refer to
the instructions inside the IA key
for the correct orientation of the
battery. Press the battery down to
ensure that the battery is fully
seated in the battery housing cavity.
4. Snap the battery cover back onto the transmitter and install the
backup key.
Note:
Replacement of the battery will
not
cause the IKT or IA key to
become de-programmed from your vehicle. They should operate normally
after battery replacement.
Replacing lost intelligent access keys (IA keys)
If you would like to have your IA keys reprogrammed because you lost
one, or would like to buy additional transmitters you can either
reprogram them yourself, or take
all transmitters
to your authorized
dealer for reprogramming.
How to reprogram your intelligent access keys (IA keys)
To program new IA keys yourself, refer to
SecuriLock
威
passive anti-theft
system
in this chapter.
Note:
At least two already programmed
transmitters are required to perform this procedure yourself.
Illuminated entry
The interior lamps, parking lamps and puddle lamps (if equipped)
illuminate when the integrated keyhead transmitter, intelligent access
keys or the keyless entry system keypad is used to unlock the door(s).
The illuminated entry system will turn off the lights if:
•
the ignition is turned on, or
•
the
control on the transmitter is pressed, or
•
the vehicle is locked using the keyless entry keypad, or
•
after 25 seconds of illumination.
The lights will not turn off if:
•
they have been turned on with the dimmer control, or
•
any door is open.
Locks and Security
145
2011 Explorer
(exp)
Owners Guide, 4th Printing
USA
(fus)
