Ford Expedition 1999 Скачать руководство пользователя страница 2

Страница: 2 / 4

8. Remove the bolts.

9. Using the special tools, remove the torsion bar adjustment nuts.

Tighten the special tool until the torsion bar adjuster lifts off the adjuster nut.

10. Remove the torsion bar adjusting brackets.

1. Move the torsion bars forward.
2. Remove the torsion bar adjusting brackets.

11. Pull the torsion bar rearward and separate it from the lower control arm. Remove the RH torsion bar only.

12. Remove the six bolts and the torsion bar crossmember.

Page 2 of 4

1999 Expedition/Navigator Workshop Manual

8/14/2010

http://www.fordtechservice.dealerconnection.com/pubs/con...

Содержание Expedition 1999

Страница 1: ...ft balance index mark the front driveshaft Remove the front driveshaft For additional information refer to Section 205 01 7 Make preliminary adjustment references 1 Index mark the torsion bars to the...

Страница 2: ...ion bar adjusting brackets 1 Move the torsion bars forward 2 Remove the torsion bar adjusting brackets 11 Pull the torsion bar rearward and separate it from the lower control arm Remove the RH torsion...

Страница 3: ...connector if equipped 15 Disconnect the electric shift motor electrical connector if equipped 16 Disconnect the vent hose 17 Using a suitable jack support the transfer case Secure the transfer case t...

Страница 4: ...the transfer case from the vehicle 20 CAUTION Carefully clean the gasket surfaces Nicks and gouges cause fluid leaks Remove the transfer case to transmission gasket and clean the mating surfaces Page...