-28-
Capacities and Specifications
Capacities and Specifications
FLUID SPECIFICATIONS
Engine oil
Ford Motor Company recommends the use of
SAE 0W-30
oil meeting the
requirements of Ford specification
WSS-M2C950-A
.
WARNING
Use of alternative oils may result in degraded performance, fuel economy and
emissions. Do not use non-detergent or API class SC, SD, SE, SF, SG or SH oils
or oil additives.
Topping up the oil :
Only use fluid that meets Ford specifications. If you are unable
to find an oil that meets the specification defined by
WSS-M2C950-A
,
you must
use an
SAE 0W-30
oil
that meets the specification defined by
ACEA C2
but no
more than 1 Litre in any service interval.
Note:
Use of topping up oils other than the one specified can result in longer
engine cranking periods, reduced engine performance, reduced fuel economy and
increased emission levels.
Brake fluid
Use only
DOT 4 LV
brake fluid or fluid which meets the requirements of Ford
specification
WSS-M6C65-A2
.
Engine
coolant
R152C5L
Use a 50% by volume mixture of glycol based anti-freeze/anti-boil concentrate
meeting Ford specification
WSS-M97B44-D
in deionized or demineralized water.
WARNING
Do not mix different grades of coolant together. Always flush the system
before refilling with different grade coolant
PowerShift® Dual Clutch Transmission Fluid (MPS6)
Use only PowerShift® Dual Clutch Transmission fluid (MPS6) meeting Ford
specification
WSS-M2C936-A
.
Ford part number
6U7J-M2C936-AA
meets this specification.
Содержание Endura
