Ford BRONCO 1967, Руководство по установке

Страница: 5 / 37

www.classicautoair.com • 866.435.7801
PAGE
5
The air conditioning system in your car is comprised of a compressor,
condenser, expansion valve, receiver/drier, and evaporator. Refrigerant (also
known as Freon) is compressed in the compressor. In the condenser, gas is
cooled to a liquid state and travels to the expansion valve. As the liquid refrigerant
goes through the expansion valve it rapidly cools in the evaporator. A fan blows
over the evaporator and cools the air that blows out your vents
Evaporator with Blower Fan
In order to remove the heat from the air in the vehicle,
the A/C evaporator allows the refrigerant to absorb the heat from the air passing over it. The blower fan
moves cool air out into the car interior.
Compressor
The compressor pumps and circulates the refrigerant through the system.
Condenser
The condenser is a heat exchanger mounted at the front of the vehicle. Heat drawn
out of the interior of the car is expelled here.
Receiver/Drier
The drier not only dries refrigerant, it also filters the refrigerant and stores it
under certain operating conditions.
High Pressure Switch
A pressure switch is used to shut down the system if high or low
pressure is detected, basically it acts as a safety switch.
A Basic Overview of Automotive A/C....
Receiver
Drier
Compressor
Evaporator Unit
Expansion Valve
Condenser
Suction
Valve Discharge
Valve
Firewall
OUTSIDE AIR
COLD AIR INTO VEHICLE
AIR FROM INSIDE VEHICLE
GROUND
POWER
SUCTION HOSE
DISCHARGE HOSE
LIQUID HOSE
1
1
2
3
4
5
2
3
4
5
COOLED AIR