Important Tips
●
Maximum drill RPM is 650 .
●
Do not use with a hammer drill or impact driver .
●
Do not reverse the drill . Only rotate in a clockwise direction .
●
Do not use grease or lubricant that will allow chips to adhere to the cutters .
●
For proper coupon retention, the full length of the pilot drill retaining wire must extend beyond the main cutter to allow
proper
gripping of the coupon (figure #1) .
●
To assist with cutter removal, remove the shaft from the machine body and slide the shaft through the square opening in the
adapter wrench (figure #2) for leverage, and to prevent the shaft from turning while removing cutters .
●
Use provided coupon extractor (figure #3) to free stuck coupons . After removing the pilot bit, remove the cutter from the shaft .
Thread the appropriate extractor through the bottom of the cutter to release the coupon .
●
Use caution when applying force to the machine to avoid drilling through the back side of the pipe .
figure #1
1/16" Minimum
Coupon Extractor figure #3
SIMTAP™ Adapter Wrench figure #2
Square opening for
SIMTAP shaft
The Ford SIMTAP™ Drilling Machine
Operating and Assembly Instructions
AB-15
Retaining
Wire
Содержание 77
Страница 2: ...AB 2 ...
