Disengaging the System
Press the brake pedal or press
CNCL
. The
last set speed displays in grey but does not
erase.
Overriding the System
WARNING
Whenever the driver presses the
accelerator pedal and overrides the
system, the system does not
automatically apply the brakes to maintain
the set distance from any vehicle ahead.
Press the accelerator pedal to override the
set speed and gap distance.
E144529
When you override the system,
the green indicator light
illuminates and the lead vehicle
graphic does not show in the
information display.
The system resumes operation when you
release the accelerator pedal. The vehicle
speed decreases to the set speed, or a
slower speed if following a slower vehicle.
Changing the Set Speed
•
Press and release
SET+
or
SET-
. The
set speed changes in approximately
1 mph (2 km/h) increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
•
Press and hold
SET+
or
SET-
. Release
the control when you reach the desired
speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display when the system is
active.
Canceling the Set Speed
Press the brake pedal or press and release
CNCL
. The last set speed displays with a
strikethrough.
Resuming the Set Speed
Note:
Only use resume if you are aware of
the set speed and intend to return to it.
Press and release
RES
. The vehicle returns
to the previously set speed. The set speed
displays continuously in the information
display while the system is active.
Automatic Cancellation
The system does not operate below
12 mph (20 km/h). An audible warning
sounds and the automatic braking releases
if the vehicle drops below this speed.
Automatic cancellation can also occur if:
•
The tires lose traction.
•
The engine speed is too low.
•
You apply the parking brake.
Note:
If the engine speed drops too low,
the information display indicates low engine
speed. Shift to a lower gear (manual
transmission only) to avoid automatic
cancellation.
Hilly Condition Usage
Note:
An audible alarm sounds and the
system shuts down if it is applying brakes
for an extended period of time. This allows
the brakes to cool. The system functions
normally again when the brakes cool.
Select a lower gear during prolonged
downhill driving on steep slopes, such as
mountainous areas, when the system is
active. In such situations, the system needs
additional engine braking to reduce the
load on the vehicle’s regular brake system
to prevent the brakes from overheating.
192
Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing
Cruise Control
Содержание 2016 Fusion
Страница 3: ......
Страница 9: ...6 Fusion Mondeo CC7 Canada United States of America enUSA First Printing ...
Страница 136: ...6 way power seat E176793 133 Fusion Mondeo CC7 Canada United States of America enUSA First Printing Seats ...
Страница 507: ...504 Fusion Mondeo CC7 Canada United States of America enUSA First Printing ...