SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED)
The keypad, located near the driver window, is invisible until touched
and then it lights up so you can see and touch the appropriate buttons.
Note:
If you enter your entry code too fast on the keypad, the unlock
function may not work. Enter your entry code again more slowly.
You can use the keypad to:
•
lock or unlock the doors
•
recall memory features
•
enable or disable the autolock and
autounlock
•
arm and disarm the anti-theft alarm
You can operate the keypad with the factory-set 5-digit entry code. This
code is located on the owner’s wallet card in the glove box and is
available from an authorized dealer. You can also create up to three of
your own 5-digit personal entry codes.
Programming a Personal Entry Code
To create your own personal entry code:
1. Enter the factory-set code.
2. Press the
1
•
2
on the keypad within five seconds.
3. Enter your personal 5-digit code. You must enter each number within
five seconds of each other.
4. For memory recall feature, enter the sixth digit
1
•
2
to store driver 1
settings or
3
•
4
to store driver 2 settings.
Note:
Pressing
5
•
6
,
7
•
8
, or
9
•
0
keypad numbers as a sixth digit will
not recall a driver memory setting.
Note:
The factory-set code cannot be associated with a memory setting.
5. The doors will lock and then unlock to confirm that programming is
complete.
You may also program a personal entry code through the MyFord Touch
system. Refer to the
MyFord Touch
chapter.
Tips:
•
Do not set a code that uses five of the same number.
•
Do not use five numbers in sequential order.
•
The factory-set code will work even if you have set your own personal
code.
Locks
77
2015 Expedition
(exd)
Owners Guide gf, 1st Printing, July 2014
USA
(fus)
