Traffic Information Control
(If
Equipped)
To receive alerts about traffic, you must
press the TA button. A TA symbol is
displayed to show that the feature was
activated.
Turning Traffic Announcements On and
Off
Before you can receive traffic
announcements, you must press either the
TA button. A TA display will appear to
show the feature is switched on.
If you are already tuned to a station that
broadcasts traffic information, TP will also
be displayed. Otherwise the unit will search
for a traffic program.
When traffic information is broadcast, it
will automatically interrupt normal radio
or CD playback and Traffic announcement
will appear in the display.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless TA
is turned off, then on again.
Note:
If traffic announcement is on and you
select a preset or manual tune to a non
traffic announcement station no traffic
announcement will be heard.
Note:
When you are listening to a non
traffic announcement station and turn
traffic announcement off and on again a TP
seek will occur.
Traffic Announcement Volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume:
•
Use the volume control to make the
necessary adjustment during an
incoming traffic announcement
broadcast. The display will show the
level selected.
Ending Traffic Announcements
The audio unit returns to the previous
settings at the end of each traffic
announcement. To end a traffic
announcement early, press any button.
Note:
If you press
TA
or
TRAFFIC
at any
other time, it switches all announcements
off.
Automatic Volume Control
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
1.
Press the MENU button and AUDIO
SETTINGS.
2. Select VOL. ADJUSTABLE.
3. Use the arrow button, left or right, to
adjust the setting.
4. Press the OK button to confirm your
selection.
5. Press the MENU button to return.
News Broadcasts
Your audio unit may interrupt normal
reception to broadcast news bulletins from
stations on the FM frequency band, radio
data system or other enhanced network
linked stations.
The display will indicate there is an
incoming announcement, during news
broadcasts. When the audio unit interrupts
for a news broadcast the preset volume
level will be the same as traffic
announcements.
1.
Press the MENU button.
2. Select AUDIO SETTINGS.
177
Ecosport (CBW) Vehicles Built From: 01-12-2014 Vehicles Built Up To: 29-03-2015, CG3590en enGBR, Edition date: 08/2014, First Printing
Audio System