Deactivating and Activating the Belt-Minder
T
Feature
WARNING:
While the system allows you to deactivate it, this
system is designed to improve your chances of being safely
belted and surviving an accident. We recommend you leave the system
activated for yourself and others who may use the vehicle. To reduce
the risk of injury, do not deactivate/activate the system while driving
the vehicle.
Note:
The driver and front passenger warning are deactivated and
activated independently. When deactivating or activating one seating
position, do not buckle the other position as this will terminate the
process.
Read Steps 1 - 4 thoroughly before proceeding with the deactivation
or activation programming procedure.
Before following the procedure, make sure that:
•
the parking brake is set.
•
the transmission selector lever is in position
P
.
•
the ignition is off.
•
the driver and front passenger safety belts are unbuckled.
1. Turn the ignition on. DO NOT START THE ENGINE.
2. Wait until the safety belt warning light turns off (approximately one
minute).
•
Once the next step is started, the procedure must be completed
within 60 seconds.
3. For the seating position being disabled, buckle then unbuckle the
safety belt four times at a moderate speed, ending in the unbuckled
state.
•
After Step 3, the safety belt warning light will flash for three times as
a confirmation
4. Within approximately seven seconds of the light turning off, buckle
then unbuckle the safety belt.
•
This will disable the feature for that seating position if it is currently
enabled.
•
This will enable the feature for that seating position if it is currently
disabled.
Safety Belts
41
2013 Police
(pol)
Owners Guide gf, 2nd Printing
USA
(fus)