Ford 2012 Flex Скачать руководство пользователя страница 156

Страница: 156 / 407

Second row outboard seat head restraints–

The outboard head

restraints are non adjustable, but they can be removed.

The non-adjustable head restraints
consist of :

•

a trimmed energy absorbing foam
and structure (1),

•

two steel stems (2),

•

and two guide sleeve
unlock/remove buttons (3).

To remove the non-adjustable head restraint, do the following:

1. Simultaneously press and hold
both unlock/remove buttons, then
pull up on the head restraint.

To reinstall the non-adjustable head restraint, do the following:

1. Insert the two stems into the
guide sleeve collars.

2. Push the head restraint down
until it locks.

Seating and Safety Restraints

155

2012 Flex

(471)

Owners Guide, 2nd Printing
USA

(fus)

Содержание 2012 Flex
























































































































































































































































































































































































































Результаты поиска

Содержание 2012 Flex

Отзывы:

Бренды по названию

Популярные бренды

Ford 2012 Flex, Руководство пользователя

Результаты поиска

Содержание 2012 Flex

Отзывы:

Бренды по названию

Популярные бренды