Ford 2012 F-150 Скачать руководство пользователя страница 426

Страница: 426 / 476

•

Check under the hood for any foreign material that may have collected
during storage (mice/squirrel nests).

•

Check the exhaust for any foreign material that may have collected
during storage.

•

Check tire pressures and set tire inflation per the Tire Label.

•

Check brake pedal operation. Drive the vehicle 15 ft (4.5 meters) back
and forth to remove rust build-up.

•

Check fluid levels (including coolant, oil and gas) to make sure there
are no leaks, and fluids are at recommended levels.

•

If the battery was removed, clean the battery cable ends and inspect.

Contact your authorized dealer if you have any concerns or issues.

MOTORCRAFT PART NUMBERS

Component

3.7L V6

engine

5.0L V8

engine

6.2L V8

engine

3.5L V6

EcoBoost™

engine

Air filter

element

FA-1883

Battery

BXT-65-750

Oil Filter

FL-500-S

FL-820-S

FL-500-S

Spark plugs

Windshield

wiper blade

WW-2201-PF

For spark plug replacement, see your authorized dealer. Refer to

scheduled maintenance information

for the appropriate intervals for

changing the spark plugs.

Replace the spark plugs with ones that meet Ford material and
design specifications for your vehicle, such as Motorcraft

威

equivalent replacement parts. The customer warranty may be
void for any damage to the engine if such spark plugs are not
used.

Maintenance and Specifications

426

2012 F-150

(f12)

Owners Guide, 2nd Printing
USA

(fus)

Содержание 2012 F-150





























































































































































































































































































































































































































































































Результаты поиска

Содержание 2012 F-150

Отзывы:

Бренды по названию

Популярные бренды

Ford 2012 F-150, Руководство пользователя

Результаты поиска

Содержание 2012 F-150

Отзывы:

Бренды по названию

Популярные бренды