Ford 2011 Navigator страница 35 Скачать руководство пользователя

Страница: 35 / 370

In TEXT MODE,

press TEXT and then SEEK

to view the

additional display text when “>” is active in the display.

Satellite radio is

available only with a valid SIRIUS subscription. Check with your
authorized dealer for availability.

FWD (Fast Forward):

Press FWD to manually advance in a
CD/MP3 track.

TEXT/SCAN: In radio mode,

press and hold for a brief sampling
of radio stations.

In CD/MP3 mode,

press and release to view the track title, artist name

or disc title. Press and hold for a brief sampling of all tracks on the
current disc.

In satellite radio mode,

press and release to enter TEXT MODE and

toggle between channel name/channel category and the current song
title/artist.

In TEXT MODE,

sometimes the display requires additional text to be

displayed. When the “>” indicator is active, press TEXT and then
SEEK

to view the additional display text. When the “<” indicator is

active, press TEXT and then

SEEK to view the previous display

text.

10.

REV (Reverse):

Press

REV to manually reverse in a CD
track.

11.

SEEK: In radio and

CD/MP3 mode,

press to access the

previous strong station or track.

In satellite radio mode,

press

SEEK to seek to the previous

channel. If a specific category is selected, (Jazz, Rock, News, etc.),
press

SEEK to seek to the previous channel in the selected category.

Press and hold

SEEK to fast seek through the previous channels.

In TEXT MODE

press

SEEK to view the previous display text

when “<” is active in the display.

Satellite radio is available only with a valid SIRIUS subscription.
Check with your authorized dealer for availability.

Entertainment Systems

2011 Navigator

(nav)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2011 Navigator



















































































































































































































































































































































































Результаты поиска

Содержание 2011 Navigator

Отзывы:

Похожие инструкции для 2011 Navigator

Бренды по названию

Популярные бренды

Ford 2011 Navigator, Руководство пользователя

Результаты поиска

Содержание 2011 Navigator

Отзывы:

Похожие инструкции для 2011 Navigator

Бренды по названию

Популярные бренды