Ford 2011 F-250 Скачать руководство пользователя страница 154

Страница: 154 / 449

To remove the non-adjustable head restraint, do the following:

Simultaneously press and hold both
unlock/remove buttons, then pull up
on the head restraint.

To reinstall the non-adjustable head restraint, do the following:

1. Insert the two stems into the
guide sleeve collars.

2. Push the head restraint down
until it locks.

WARNING:

The non-adjustable head restraint is a safety device.

It should be installed whenever the seat is occupied.

WARNING:

To minimize the risk of neck injury in the event of a

crash, head restraints must be installed properly.

Seating and Safety Restraints

154

2011 F-250/350/450/550

(f23)

Owners Guide, 4th Printing
USA

(fus)

Содержание 2011 F-250


































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 F-250

Отзывы:

Бренды по названию

Популярные бренды

Ford 2011 F-250, Руководство пользователя

Результаты поиска

Содержание 2011 F-250

Отзывы:

Бренды по названию

Популярные бренды