Ford 2010 Transit Connect Скачать руководство пользователя страница 88

Страница: 88 / 259

WARNING:

Position the safety belt height adjusters so that the

belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the safety
belt and increase the risk of injury in a collision.

Safety belt warning light and indicator chime

The safety belt warning light illuminates in the instrument cluster and a
chime sounds to remind the occupants to fasten their safety belts.

Conditions of operation

If...

Then...

The driver’s safety belt is not
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds 4-8 seconds.

The driver’s safety belt is
buckled while the indicator
light is illuminated and the
warning chime is sounding...

The safety belt warning light and
warning chime turn off.

The driver’s safety belt is
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light and
indicator chime remain off.

Belt-Minder

姞

The Belt-Minder

威

feature is a supplemental warning to the safety belt

warning function. This feature provides additional reminders by
intermittently sounding a chime and illuminating the safety belt warning
light in the instrument cluster when the driver’s and front passenger’s
safety belt is unbuckled.

The Belt-Minder

威

feature uses information from the front passenger

sensing system to determine if a front seat passenger is present and
therefore potentially in need of a warning. To avoid activating the
Belt-Minder

威

feature for objects placed in the front passenger seat,

warnings will only be given to large front seat occupants as determined
by the front passenger sensing system.

Seating and Safety Restraints

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Содержание 2010 Transit Connect




































































































































































































































































Результаты поиска

Содержание 2010 Transit Connect

Отзывы:

Похожие инструкции для 2010 Transit Connect

Бренды по названию

Популярные бренды

Ford 2010 Transit Connect, Руководство пользователя

Результаты поиска

Содержание 2010 Transit Connect

Отзывы:

Похожие инструкции для 2010 Transit Connect

Бренды по названию

Популярные бренды