Ford 2010 Flex, Руководство пользователя

Страница: 150 / 397

•
Press and hold the 7
•
8 and 9
•
0 controls on the keyless entry
pad at the same time to lock the
doors (driver’s door must be
closed).
There is a 20 second countdown
when any of the above actions occur
before the vehicle becomes armed.
Each door, the hood, and the
liftgate is armed individually, and if
any are open, they must be closed
before the open entry point (door,
hood, or liftgate) can enter the
20 second countdown.
The turn signal lamps will flash once when all doors, the hood and the
liftgate are closed indicating the vehicle is locked and entering the
20 second countdown.
Disarming the system
You can disarm the system by any of the following actions:
•
Unlock the doors by using the remote entry transmitter portion of
your Integrated Keyhead Transmitter.
•
Unlock the doors by using your keyless entry pad.
•
Unlock the driver’s door with a key. Turn the key full rearward
(toward the rear of the vehicle) to ensure the alarm disarms.
•
Turn ignition to the on position with a valid SecuriLock
威
key or
Integrated Keyhead Transmitter (IKT).
•
Press the panic control on the remote entry transmitter portion of
your IKT. This will only shut off the horn and turn lamps when the
alarm is sounding. The alarm system will still be armed.
Pressing the power door unlock control within the 20 second prearmed
mode will return the vehicle to a disarmed state.
Triggering the anti-theft system
The armed system will be triggered if:
•
Any door, the hood or the liftgate is opened without using the door
key, keypad or the remote entry transmitter portion of your IKT.
•
The ignition is turned to the on position with an invalid SecuriLock
威
key or IKT.
Locks and Security
150
2010 Flex (471)
Owners Guide, 1st Printing
USA
(fus)