Ford 2009 Mustang Скачать руководство пользователя страница 190

Страница: 190 / 292

To put your vehicle in P (Park):

•

Come to a complete stop

•

Move the gearshift lever and securely latch it in P (Park)

WARNING:

Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the

LOCK position and remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.

D (Drive) with Overdrive

The normal driving position for the best fuel economy. Transmission
operates in gears one through five.

D (Drive) without Overdrive

D (Drive) with Overdrive can be
deactivated by pressing the
transmission control switch on the
right side of the shift handle.

•

This position allows for all forward gears except Overdrive.

•

O/D OFF lamp is illuminated.

•

Provides engine braking.

•

Use when driving conditions cause excessive shifting from O/D to
other gears. Examples: heavy city traffic where continuous shifting in

O/D

OFF

2009 05+ Mustang

(197)

Owners Guide
USA

(fus)

Driving

190

Содержание 2009 Mustang





































































































































































































































































































Результаты поиска

Содержание 2009 Mustang

Отзывы:

Бренды по названию

Популярные бренды

Ford 2009 Mustang, Руководство пользователя

Результаты поиска

Содержание 2009 Mustang

Отзывы:

Бренды по названию

Популярные бренды