Ford 2009 F-250 Скачать руководство пользователя страница 172

Страница: 172 / 419

Full bench seat (if equipped)

•

Lift the release bar to move the
seat forward or backward. Ensure
that the seat is relatched into
place.

•

Pull up on the lever located at
the bottom of the seatback to
quickly fold the seatback forward.

•

Pull up on the lever located at
the side of the seat cushion to
recline the seatback and to return
the seat to the upright position.

40/20/40 split bench seat (if equipped)

•

Lift the track release bar to move
the seat forward or backward.
Ensure the seat is relatched into
place.

•

Pull the handle on the side of the
seat up to recline the seat.

•

Push down the lever located at
the bottom of the seatback to
quickly fold the seatback forward.

2009 F-250/350/450/550

(f23)

Owners Guide, 2nd Printing
USA

(fus)

Seating and Safety Restraints

172

Содержание 2009 F-250




































































































































































































































































































































































































































Результаты поиска

Содержание 2009 F-250

Отзывы:

Похожие инструкции для 2009 F-250

Бренды по названию

Популярные бренды

Ford 2009 F-250, Руководство пользователя

Результаты поиска

Содержание 2009 F-250

Отзывы:

Похожие инструкции для 2009 F-250

Бренды по названию

Популярные бренды