Ford 2009 Explorer Скачать руководство пользователя страница 355

Страница: 355 / 407

SERVICE RECOMMENDATIONS

•

Use the

scheduled maintenance information

to track routine

service.

•

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications.

•

Your authorized dealer can provide parts and service.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

•

Do not work on a hot engine.

•

Make sure that nothing gets caught in moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all open flames and other lit material away from the battery and
all fuel related parts.

WARNING:

Turn off the power running boards, if equipped,

before working under the vehicle, jacking or placing any object

under the vehicle. Never place your hand between the extended
running board and the vehicle. A moving running board may cause
injury.

Working with the engine off

1. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

2. Turn off the engine and remove the key.

3. Block the wheels to prevent the vehicle from moving unexpectedly.

Working with the engine on

1. Set the parking brake and shift to P (Park).

2. Block the wheels.

WARNING:

To reduce the risk of vehicle damage and/or

personal burn injuries, do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

2009 Explorer

(exp)

Owners Guide, 1st Printing
USA

(fus)

Maintenance and Specifications

355

Содержание 2009 Explorer
























































































































































































































































































































































































































Результаты поиска

Содержание 2009 Explorer

Отзывы:

Похожие инструкции для 2009 Explorer

Бренды по названию

Популярные бренды

Ford 2009 Explorer, Руководство пользователя

Результаты поиска

Содержание 2009 Explorer

Отзывы:

Похожие инструкции для 2009 Explorer

Бренды по названию

Популярные бренды