•
If the oil level is
within this
range,
the oil level is acceptable.
DO NOT ADD OIL.
•
If the oil level is
below this
mark,
engine
oil must be added
to raise the level within the
normal operating range.
•
If required, add engine oil to the
engine. Refer to
Adding engine
oil
in this chapter.
•
Do not overfill the engine
with oil. Oil levels above this
mark may cause engine
damage.
If the engine is
overfilled, some oil must be
removed from the engine by an authorized dealer.
7. Put the dipstick back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to
Checking the engine
oil
in this chapter.
2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level dipstick.
4. Install the dipstick and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap clockwise
until three clicks can be heard.
2009 Crown Victoria
(cro)
Owners Guide, 2nd Printing
USA
(fus)
Maintenance and Specifications
229
