Change the air filter when the gauge
reads 25 inches (635 mm). After
installation of the new filter
element, reset the gauge by pressing
the reset button on top of the
gauge.
ENGINE AND SUBSYSTEM MAINTENANCE
Note:
To prevent damage to the engine control module or any parts of
the electrical system, never spray-wash the parts directly.
For effective emissions control and low operating cost, it is important
that maintenance operations listed in this section be performed at the
specified periods or mileage intervals indicated (kilometers, miles, hours,
or months, whichever comes first).
Service intervals are based upon average operating conditions. Where
dusty, frequent start-and-stop or heavily laden operations are
encountered, more frequent servicing will be required.
As the vehicle owner, you are responsible for the performance of all
scheduled maintenance. The required maintenance operations may be
performed by the owner at a service establishment of the owner’s
choosing. Any replacement parts used for required maintenance services
or repairs should be genuine manufacturer service parts or equivalent in
quality and performance to genuine manufacturer service parts. Use of
inferior parts hinders operations of the engine and emissions controls
and can reduce engine life and/or jeopardize the warranty.
Receipts covering the performance of regular maintenance should be
retained in the event questions arise concerning maintenance. The
receipts should be transferred to each subsequent owner of the vehicle.
Catalytic converter
If your vehicle is equipped with a catalytic converter, it is important to
review the
scheduled maintenance information
to ensure proper
functioning of the catalytic converter. Also, take precautions not to
damage the catalytic converter when servicing your engine or storing
your vehicle.
Do not
blend waste oil with diesel fuel. Operate only on
ultra low sulfur diesel fuel (less than 15 parts per million) with a Cetane
value of 42 or higher.
2009 Low Cab Forward Truck
(lcf)
Supplement
USA
(fus)
Maintenance and Specifications
160
