Ford 2007 Freestar Скачать руководство пользователя страница 133

Страница: 133 / 312

4. Store the belt in the housing
found on the ceiling by inserting the
smaller tongue in the slot provided.

Note:

The seat can be stowed with

the safety belt connected if desired.
Store the tongue of the sliding
latchplate in the belt pocket to
avoid potential damage to the seat.

5. Push the head restraint release buttons and move the head restraints
fully down. Remove all objects from the seat and stowage tub.

6. From the rear of the vehicle, fold seat back by

pulling and releasing

the number 1 strap.

2007 Freestar

(win)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

133

Содержание 2007 Freestar

























































































































































































































































































































Результаты поиска

Содержание 2007 Freestar

Отзывы:

Бренды по названию

Популярные бренды

Ford 2007 Freestar, Руководство пользователя

Результаты поиска

Содержание 2007 Freestar

Отзывы:

Бренды по названию

Популярные бренды