Ford 2007 Edge страница 30 Скачать руководство пользователя

Страница: 30 / 320

COMPRESS (Compression):

Available only in CD/MP3 mode. Press

MENU until COMPRESS ON/OFF appears in the display. Use

toggle ON/OFF. When COMPRESS is ON, the system will bring the soft
and loud CD passages together for a more consistent listening level.

ALL SEATS (Occupancy mode):

Use

to select and optimize

sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

SINGLE PLAY/DUAL PLAY (if equipped):

If SINGLE PLAY is ON,

press

for DUAL PLAY. For further information on Single

Play/Dual Play, refer to the

Family entertainment DVD system

later in

this chapter.

AUX:

Press repeatedly to cycle

through FES/DVD (if equipped),
LINE IN (auxiliary audio mode) and
SAT1, SAT2 and SAT3 modes (satellite radio, if equipped).

Satellite radio is available only with a valid SIRIUS radio
subscription. Check with your authorized dealer for availability.

For location and further information on auxiliary audio mode, refer to

Auxiliary input jack

later in this chapter.

For further information on the FES/DVD system (if equipped), refer to

Family Entertainment DVD system

later in this chapter.

SEEK

In radio and CD/MP3

mode,

press to access the previous

(

) or next (

) strong station

or track.

In satellite radio mode (if equipped),

press

SEEK, SEEK

seek to the previous/next channel. If a specific category is selected,
(Jazz, Rock, News, etc.), press

SEEK, SEEK

to seek to the

previous/next channel in the selected category. Press and hold

SEEK, SEEK

to fast seek through the previous /next channels.

In TEXT MODE,

press

SEEK, SEEK

to view the

previous/additional display text.

In CATEGORY MODE,

press

SEEK

to select a category.

Satellite radio is available only with a valid SIRIUS subscription.
Check with your authorized dealer for availability.

2007 Edge

(edg)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Содержание 2007 Edge

































































































































































































































































































































Результаты поиска

Содержание 2007 Edge

Отзывы:

Похожие инструкции для 2007 Edge

Бренды по названию

Популярные бренды

Ford 2007 Edge, Руководство пользователя

Результаты поиска

Содержание 2007 Edge

Отзывы:

Похожие инструкции для 2007 Edge

Бренды по названию

Популярные бренды