Ford 2006 E-150, Руководство пользователя

Страница: 30 / 248

HEATER ONLY SYSTEM
(IF EQUIPPED)
1. Fan speed adjustment: Controls
the volume of air circulated in the
vehicle.
2. Temperature selection:
Controls the temperature of the
airflow in the vehicle.
3. Air flow selections: Controls the direction of the airflow in the
vehicle. See the following for a brief description on each control.
VENT: Distributes outside air through the instrument panel vents.
FLR: Distributes outside air through the floor vents.
OFF: Outside air is shut out and the climate system is turned off.
MIX: Distributes outside air through the windshield defroster vents and
the floor vents.
: Distributes outside air through the windshield defroster vents.
Operating tips
•
To reduce fog build up on the windshield during humid weather, place
the air flow selector in the
position.
•
To reduce humidity build up inside the vehicle during cold or warm
weather, do not drive with the air flow selector in the OFF position.
•
Do not put objects under the front seats that will interfere with the air
flow to the back seats.
•
Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
To aid in side window defogging/demisting in cold weather:
1. Select MIX.
2. Set the temperature control to maintain comfort.
3. Set the fan speed to HI.
Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.
2006 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Climate Controls
30