To reset the oil monitoring system to 100% after each oil change
(approximately 10,000 miles [16,000 km] or 12 months) perform the
following:
1. Press the SET control to access
the system check function.
2. Press and release the SET control
to display “OIL CHNG XXX% HOLD
SET NEW”.
3. Press and hold the SET control
for 2 seconds to display “OIL
CHANGE SET TO 100%”.
Note:
This feature is based on
distance traveled or time elapsed
since last reset. You must reset this
feature every oil change to ensure accuracy
DATA ERR.
These messages indicate improper operation of the vehicle
network communication between electronic modules.
•
Fuel computer
•
Oil life
•
Charging system
•
Door sensor
•
Washer fluid
•
Brake fluid
•
Engine sensor
Contact your Ford dealer as soon as possible if these messages occur on
a regular basis.
REVIEW COPY
2005 Escape HEV
(hev)
, Owners Guide (post-2002-fmt)
(own2002)
,
Market:
USA_English
(fus)
Driver Controls
103