Ford 2003 F250 страница 77 Скачать руководство пользователя

Страница: 77 / 280

FOLDING UP THE REAR SEATS (IF EQUIPPED — SUPERCAB
ONLY)

The rear seatback has a split 60/40 seat. Each seat cushion can be
flipped up into the seatback position.

1. Pull lever to release seat cushion.

2. Rotate seat cushion up until it
locks into vertical storage position.

RETURNING THE SEAT TO SEATING POSITION

Always be sure that the seat is in a latched position, whether the
seat is occupied or empty. If not latched, the seat may cause

injury during a sudden stop.

1. Pull lever on the side of the seat to release seat cushion from storage
position.

2. Push seat cushion down until it locks into horizontal position.

SAFETY RESTRAINTS

Safety restraints precautions

Always drive and ride with your seatback upright and the lap
belt snug and low across the hips.

To reduce the risk of injury, make sure children sit where they
can be properly restrained.

Never let a passenger hold a child on his or her lap while the
vehicle is moving. The passenger cannot protect the child from

injury in a collision.

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Seating and Safety Restraints

Содержание 2003 F250

























































































































































































































































































Результаты поиска

Содержание 2003 F250

Отзывы:

Похожие инструкции для 2003 F250

Бренды по названию

Популярные бренды

Ford 2003 F250, Руководство пользователя

Результаты поиска

Содержание 2003 F250

Отзывы:

Похожие инструкции для 2003 F250

Бренды по названию

Популярные бренды