Ford 2002 Ranger Скачать руководство пользователя страница 162

Страница: 162 / 296

N (Neutral)

With the gearshift lever in N
(Neutral), the vehicle can be started
and is free to roll. Hold the brake
pedal down while in this position.

(Overdrive)

The normal driving position for the
best fuel economy. Transmission
operates in gears one through five.

(Overdrive) can be deactivated

by pressing the transmission control
switch on the end of the gearshift
lever.

The transmission control indicator
light (TCIL) will illuminate on the
instrument cluster.

Drive

– Not shown on the display. Activate by pressing the transmission

control switch on the end of the gearshift lever with the gearshift in
the

(Overdrive) position. The TCIL will illuminate on the instrument

cluster. Transmission operates in gears one through four. Drive (O/D
OFF) provides more engine braking than

(Overdrive) and is useful

whenever driving conditions (i.e., city traffic, hilly terrain, etc.) cause the
transmission to excessively shift between

(Overdrive) and other

gears. Deactivate

(Overdrive) when:

•

driving with a heavy load.

•

towing a trailer up or down steep hills.

•

additional engine braking is desired. If towing a trailer, refer to

Driving while you tow

in the

Trailer Towing

section.

To return to

(Overdrive) mode, press the transmission control

switch. The TCIL will no longer be illuminated.

Each time the vehicle is started, the transmission will automatically
return to normal

(Overdrive) mode.

O/D

ON/OFF

O/D

OFF

Driving

162

Содержание 2002 Ranger









































































































































































































































































































Результаты поиска

Содержание 2002 Ranger

Отзывы:

Бренды по названию

Популярные бренды

Ford 2002 Ranger, Руководство пользователя

Результаты поиска

Содержание 2002 Ranger

Отзывы:

Бренды по названию

Популярные бренды