manualshive.com logo in svg

Ford 2001 Ranger, Руководство пользователя

Поделиться
Скачать
Ford 2001 Ranger Скачать руководство пользователя страница 123

204-04-2

204-04-2

Wheels and Tires

SPECIFICATIONS

General Specifications

Torque Specifications

Item

Specification

Description

Nm

Lb-Ft

Tire Inflation

Lug nuts 1/2-20

135

100

Tires

See safety certification

Torque specifications are for clean, dry bolt and nut

sticker located on driver

threads. Never use oil or grease on wheel bolts or nuts.

door jamb.

Cleaners — Wheel 
Custom Bright Metal

ESR-M5B194-B

Cleaner (8A-19522-A)

DESCRIPTION AND OPERATION

WARNING: Always wear safety goggles or

Safety Precautions

a face shield when performing any work with
tire and wheel assemblies.

WARNING: Never run the engine with one

wheel off the ground, for example, when

CAUTION: Do not clean aluminum wheels

changing a tire. The wheel(s) resting on the

with steel wool, abrasive-type cleaners or strong

ground could cause the vehicle to move. 

detergents. Use Custom Bright Metal Cleaner
8A-19522-A or equivalent meeting Ford

WARNING: The tire and wheel must

specifications ESR-M5B194-B.

always be correctly matched. It is very important
to determine the size of each component before

CAUTION: Reduce the air pressure as

any assembly operations commence. Failure to

much as possible by pushing the valve core

adhere to these instructions can result in an

plunger in prior to removing the valve core.

explosive separation and cause serious bodily

Avoid working in a position in which the face or

injury or death. 

body is directly over a tire in which there is
pressure.

WARNING: Aftermarket aerosol tire

When performing any inspection or repair

sealants are extremely flammable. Always

procedures on wheels (1007/1015) and tires, follow

question the customer to make sure these

the preceding safety precautions.

products have not been used. 

WARNING: Aftermarket wheel assemblies

Wheels and Tires

may not be compatible with the vehicle. Use of
incompatible wheel assemblies can result in

Several types of wheel assemblies are available:

equipment failure and possible injury. Use only

stamped steel, forged aluminum and cast aluminum.

approved wheel assemblies.

WARNING: Use only wheels and wheel

nuts that have been designed for current model
year Ford trucks. Aftermarket wheels or wheel
nuts may not fit or function correctly, and can
cause personal injury or damage the vehicle.

2001 Ranger EV, 01/2001 

Содержание 2001 Ranger



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды